in ,

How to Get Dents Out of a Fridge

dented fridge against a bright blue wall

Whether you own a new or an old model refrigerator, there is nothing more annoying than having a dent on your fridge. As a fridge owner, you need to understand that a fridge had the same traits as a metal car. This means that the sheet on both of them is prone to denting when pushed by a large object or even a smaller item.

Basically, all dents on a fridge are removed using the same manner as a metal car. Fortunately, this process is pretty much straightforward and can be achieved with the utmost ease. With that said, in this article, we shall help you understand how to fix a dent in a refrigerator door.

Methods to Fix a Dent in a Refrigerator Door

If you are on the lookout for effective ways in which you can remove dents out of your fridge with the utmost ease, here are the key points to consider:

Temperature Differences

Melting ice cubes on a blue background

When it comes to removing dent out of a fridge, just like on a car surface, creating sudden temperature change on the surface of your fridge is enough to help erase small dents as well as scratches with the utmost ease. Using hot air to remove a dent is not only comfortable but also a highly effective process. To achieve this, you will first have to blow hot air to the dented area using a hairdryer or even a heat gun. It would help if you considered going so for approximately one-minute ensuring that the metal is heated up pretty good.

While doing this, the metal surface of your fridge will expand, and when you let it cool, the metal will contract and will allow it to pop right back with utmost smoothness.

To do this, you should consider starting by plugging a hairdryer into an outlet closest to the dented area.

Once that is done, you should go ahead and turn on the dryer and set the heat to a maximum while directing the jet of hot air towards your fridge panel and heating to the max. The dented area will become hot. Once this is achieved, go ahead and use a can of compressed air and then hold approximately six inches from your fridge’s surface. Mist the dented area for about 30 seconds or until the dent disappears.


Plunger in a spotlight on a black background

Also, you might consider using some type of vacuum tool used for cars. When applying a coverslip, you will need to take some precautions since it might damage or scratch your fridge’s surface. When you have the suction cup firm installed, go ahead and start pulling it lightly, you should consider applying enough pressure that is sufficient to loosen the dent and ensure that it is level with the surface of your fridge. You should consider increasing the pressure slightly if the bump fails to disappear.

Before using suction to remove a dent on your fridge, you will first need to clean the dented area using a cleaning solution, maybe isopropyl alcohol. Ensure that you properly rub the dented area to get rid of grime. This will make the whole process pretty much more effortless and restore your fridge back to its previous state.

Using Dry Ice

gloved hands holding pellets of dry ice

Dry ice is also vital for removing dent out of a fridge. They are freezing compared to the regular ice. Due to that, dry ice can be used to make the metal of your surface of the fridge contract, making it relatively easy to fix.

To do this, you will need to hold the dry ice on the dented surface. Since dry ice is extremely cold, you should avoid holding it with bare hands; therefore, you should wrap the ice on a soft cloth or maybe put on protective clothes to protect your fridge from scratches and protect your hand from frostbite. Keep the dry ice on the dented area for a minute or until the metal surface becomes significantly cold.

By adhering to the tips discussed in this article, you will be able to remove the dent from your fridge with ease. As we conclude, we hope that you have found this article beneficial and that you have understood how to get dents out of a fridge.

Please keep in mind that we may receive a small commissions when you click our links and make purchases. However, this does not impact our reviews and comparisons. We try our best to keep things fair and balanced, in order to help you make the best choice for you.

person resetting temperature on fridge control panel

How to Reset a KitchenAid Refrigerator Control Panel

refrigeration coild

How to Clean Kenmore Refrigerator Coils