How To Clean Under Refrigerator Coils

One of the significant refrigerator issues is the buildup on condenser coils. Therefore, learning how to clean coils under fridge will help your fridge to run smoothly for years to come. To help with that, we shall be discussing how to clean under refrigerator coils. It would be best if you considered making this maintenance task a part of your seasonal cleaning; as a result, you will be able to save an incredible amount of money in repairs in the long run.

How To Clean Under Refrigerator Coils

Following steps will guide you on how to clean refrigerator coils underneath.

Unplug Your Refrigerator

The first thing you need to consider before you start cleaning is unplugging your fridge. If your fridge’s power outlet is located at the back of the refrigerator, you will be forced to pull it from the wall. Since cleaning your coil will take significantly less time, you do not have to worry about your food going rancid.

Try To Locate Your Fridge’s Coil

You should try and locate your fridge’s condenser coil either at the base in front of your fridge or behind the toe-grill that tends to snap off. In cases where the refrigerator is not equipped with a toe-grill, you will try and locate the coil at the back of your fridge.

If you do not know how a condenser coil looks like, you should look for metal tubes with a U-shape grid pattern. Once you find them, you can now move to the next step.

Get Rid Of Dust

As time progresses, grime is sucked onto the fridge’s coils. To get rid of dust and grim, you should consider using a brush. With the brush in your hand, you should try to scrape below, above, as well as between the coil in order to remove large clumps of dirt.

You might need a flashlight to enhance visibility as you clean the coils significantly. It is recommended to use a soft-bristled brush or a wire brush, or even a duster to clean your coil to perfection.

Vacuuming

Once you get rid of significantly large grime and dirt, use a vacuum cleaner to remove the remaining dust. In case it is impossible, you should consider placing a narrow nozzle at the end of your vacuum cleaner hose. Once that is done, you will move the nozzle over your refrigerator coils; this will allow your vacuum cleaner to get rid of all the remaining grime.

You should then consider repeating scraping along with the sucking process until you get rid of all the dirt and grime in your refrigerator coil. At times while vacuuming, more grime and dirt will be revealed, and as a result, you should consider repeating the whole process.

Restarting Your Refrigerator

Once you are done cleaning your fridge, now it is time to restart the fridge.

Place The Panel Back To The Fridge

Now we need to place coils’ panel back. Ensure that you set it in its original place. When a clamping or snapping noise is produced, know that the panel has been correctly set.

Plug Your Fridge Back

Once the panel has been set correctly, go ahead and plug your fridge back into the wall. Set the refrigerator back to its original position, plug it back, and turn on the power. In case the coils are located at the back of your fridge, there should be approximately 3 cm gap between the wall and the coils. By doing so, you will be able to boost its functionality.

Point To Note

It would help if you considered cleaning your refrigerator coil at least twice yearly. Cleaning your coil helps keep the refrigerator cool effectively. Furthermore, if you own a pet, you should consider cleaning your coil more often since your pet’s fur tends to be caught easily in the fridge coils, reducing its functionality.

Cleaning your fridge coils is pretty much straightforward and does not require any sophisticated skills. To achieve that with the utmost ease, you should consider adhering to the tips discussed in this article. Once you are done cleaning the coils, you will be able to see a significant change in your refrigerator’s functionality. As we conclude, we hope that you have found this article beneficial and that you have understood how to clean under refrigerator coils.