California Time-of-Use Plans: SCE Peak Hours and PG&E Rate Basics

SCE time-of-use plans peak on summer weekdays, 4-9 p.m. or 5-8 p.m. See daily charges, baseline credits and how PG&E tiers and minimum bills work.

Southern California Edison (SCE) has two main time-of-use (TOU) plans: TOU-D-4-9PM, with its highest prices on summer weekdays from 4 to 9 p.m., and TOU-D-5-8PM, with its highest prices on summer weekdays from 5 to 8 p.m. Both add a Base Services Charge of $0.79 per day and give a baseline credit of $0.09 per kWh. PG&E’s standard residential electric rates are tiered, so the price rises as you use more energy in a billing cycle, and every PG&E customer pays a Minimum Delivery Charge.

How does a time-of-use plan set prices?

A time-of-use plan charges different prices depending on the hour and the season, and the prices are fixed ahead of time. Under the definition of time-of-use pricing, the periods and prices are set in advance and typically change no more often than twice a year, so a household can plan around them.

On SCE’s time-of-use page, the utility says power usually costs less early in the day, overnight and on weekends, and costs more on weekday evenings when demand is high. SCE splits the year into two seasons:

  • Summer: June to September
  • Winter: October to May

SCE notes that bills can be higher in summer on a TOU plan even when the total for the year comes out lower. Its newer 4-9PM and 5-8PM plans keep prices low during daylight, when solar power is feeding the grid.

What are SCE’s peak hours on each plan?

SCE’s peak hours depend on the plan, and the three plans on its page differ in who they suit:

  • TOU-D-4-9PM: highest rates on summer weekdays, 4-9 p.m. Base Services Charge $0.79 per day. Baseline credit $0.09 per kWh up to your monthly baseline allocation.
  • TOU-D-5-8PM: highest rates on summer weekdays, 5-8 p.m. Same $0.79 daily charge and $0.09 per kWh baseline credit. SCE says it suits customers who stay up late and may benefit smaller households in coastal areas with moderately sized homes or condos.
  • Plan for clean energy technology owners: highest rates from 4 p.m. to 9 p.m., the same $0.79 daily charge and no baseline credit. It is open to owners or lessees of an electric vehicle or plug-in hybrid, a home battery, or an electric heat pump for water or space heating, and they must confirm the equipment when they enroll.

SCE gives an example of the baseline credit: with a monthly allocation of 200 kWh, the bill shows an $18 credit. The prices on SCE’s page apply to customers who get both delivery and generation from SCE. If a Community Choice Aggregation or Direct Access provider supplies your generation, your rates may differ, and that provider has the generation costs.

Who can switch to an SCE time-of-use plan, and what are the limits?

After moving to a time-of-use rate at SCE, you cannot switch again for a full 12 months. Some customers have no choice:

  • Solar Billing Plan customers must be on the TOU-D-PRIME rate.
  • NEM 2.0 customers must be on a time-of-use rate.
  • TOU-D-A, TOU-D-B and TOU-D-T are discontinued. Current customers can stay on them for now, but anyone who leaves cannot re-enroll.

The rest of SCE’s offer is listed on its residential rate plans page, which also describes the Tiered plan: lower prices up to a baseline allocation and higher prices above it.

How do baseline allowances work on SCE plans?

Each SCE customer has two baseline allocations, one for summer and one for winter, matching the baseline allowance on the standard residential plan. Your allowance appears on the bill under “details of your new charges,” in the “additional information” part. A few groups get more:

  • Medical Baseline customers get an extra 16.5 kWh a day for life-support devices and other qualifying equipment.
  • Since Oct. 1, 2022, owners of a heat pump water heater on TOU-D-4-9PM or TOU-D-5-8PM can get an additional baseline allocation.

SCE no longer applies a minimum charge, but a home with zero usage still pays the daily Base Services Charge. In My Account, SCE has a chart showing which tier you were in as of the previous day and which tier you are expected to reach by the end of the billing period.

How does PG&E set residential rates?

According to PG&E’s How Rates Work page, its standard residential electric and gas rates are tiered, and California law requires tiered rates to encourage conservation. The price of energy goes up as you use more within a billing cycle.

Every PG&E customer pays a Minimum Delivery Charge for getting power over the grid:

  • $10.12 for Non-CARE customers
  • $5.06 for CARE customers

The Energy Charge pays for the electricity itself. Direct Access and Community Choice Aggregation customers do not pay PG&E’s Energy Charge; their provider’s generation costs appear in a separate section of the bill. PG&E’s page does not list peak hours for its time-of-use plans, so check PG&E’s rate plan pages for those before comparing with SCE.

Who approves rate changes in California?

The California Public Utilities Commission (CPUC) approves rate changes after a public review. PG&E says it applies to the CPUC, the request is reviewed in a public hearing with consumer groups, low-income advocates, environmental groups and agricultural interests, and the CPUC then decides what is “just and reasonable.” PG&E groups approved electric rate changes into two or three updates a year and files a General Rate Case every three years. Our explainer on how a utility rate case works goes through that process in more detail.

How can you lower costs on a time-of-use plan?

Moving flexible loads out of peak hours is the main lever. SCE’s own example is running the dishwasher off-peak instead of on-peak. Other common loads to shift are laundry, pool pumps and EV charging. To see how much a single appliance uses, compare our guide to dishwasher energy use per cycle, and for how California’s prices compare nationally, see the average electricity price by state.

Quick answers

When is electricity cheapest on SCE time-of-use plans?

SCE says prices are usually lower early in the day, overnight and on weekends. The per-kWh prices for each period are on SCE’s plan page.

Can I go back to my old SCE plan after switching?

You must stay on a new time-of-use rate for 12 months. If your old plan was TOU-D-A, TOU-D-B or TOU-D-T, you cannot return to it once you leave.

What is PG&E’s minimum bill?

The Minimum Delivery Charge is $10.12 for Non-CARE customers and $5.06 for CARE customers, and it applies even to homes that use little or no electricity.

Who do I call about a PG&E bill?

PG&E lists 1-800-743-5000, 8 a.m. to 5 p.m., Monday through Friday, for general questions, and 1-877-743-4112, 7 a.m. to 6 p.m., Monday through Friday, for its solar customer service center.

Checked against official sources in November 2026. Hours, prices and rules change: confirm on the official page before you go or apply.